Manual Wheelchair with Movable Supports — 20-inch Seat, KY903L-51

KY903L-51 wheelchair with a 20-inch seat

A manual wheelchair with a nominal 51 cm (20-inch) seat width for users needing a wider seating area during everyday mobility. It has movable armrests and leg supports that can be swung clear of the transfer path, large rear wheels and rear attendant push handles. The folding design assists transport and storage when unused.

Practical features

• A 20-inch seat. Check overall width and fit for the user and doorways.
• Movable armrests and swing-away leg supports to assist approach and lateral transfers.
• Footrests, large rear wheels and parking brakes.
• A frame that folds after the user has left the chair for transport and storage.

Use

1. Open the chair until the seat is settled. Check footrest attachment, brake operation and wheel condition.
2. Place on level ground and apply both wheel brakes before seating or transfers. Move armrests and leg supports away when needed for lateral transfers with suitable assistance.
3. Return supports to position after seating and place feet on the footplates. Release brakes to move. An attendant can push using rear handles while avoiding obstacles and steep slopes.
4. After the user has left, move footrests away and lift the seat centre to fold. Inspect brakes and fasteners and clean upholstery according to the label.

Before ordering: Confirm the available version’s frame material, maximum load and final dimensions from the product label; listings for the same model may differ.

Model: KY903L-51.

Photo note: The clear model reference photo shows a silver finish; the catalogue photo shows the supplier’s dark finish. Confirm the available finish and equipment before ordering.

Reference specifications — 51 cm seat version

Source: Official Kaiyang KY903L specification table. The table pairs a 51 cm seat with a 68 cm overall width. Confirm the supplied version’s frame material, accessories and final weight before ordering.