Manual Wheelchair with High Armrests — 18-inch Seat, KY875-A-46

KY875-A-46 manual wheelchair with an 18-inch seat

A wheelchair for everyday use with a nylon fabric seat and backrest, high padded armrests, two large rear wheels with push rims and two small front castors. The image shows fixed footrests with a front strap between them to support foot positioning while seated and moving. The folding design helps with storage or loading into a suitable vehicle after the user has left the chair.

Choosing the chair

The listed seat size is 18 inches, approximately 46 cm. Check seat width and depth, footrest height, doorway widths and the route before ordering. High armrests provide support while seated but may affect lateral transfers. Choose a safe transfer method according to the user’s ability and professional guidance.

Use

1. Open the chair until the seat is fully settled. Check wheels, footrests and any fitted stopping mechanism before seating.
2. Secure the chair during transfers and keep feet clear of the front footplates when sitting down or standing up.
3. Place the feet on the supports after seating, then use the push rims or ask an attendant to move the chair gently on suitable ground.
4. Do not lift the chair with the user seated. Do not cross slopes or obstacles without appropriate assistance.
5. Wipe and dry the fabric and frame after use and regularly check fittings and wheels. Fold only after the user has left and fingers are clear of folding points.

Model: KY875-A-46. Size: 18 inches. Fittings may differ by version and market. Confirm the stopping mechanism, load capacity and accessories of the offered unit before purchase.